Phase 3
110,000 sq ft across five buildings
Construction of Phase 3 is to commence shortly to provide a further five technology units, ranging from 16,555 – 41,955 sq ft and totalling 110,000 sq ft.
Ready for occupation Spring 2026.
- 0 sq ft Phase 3 total space
- 0kVA Power capacity per 1,000 sq ft
- 25% of all car parking spaces served by an EV charging point
- 0m Min eaves height
- 0m Min clear below first floor
- EPC A Certificate rating
- Excellent BREAAM rating
- 1:382 sq ft Designated parking spaces
Buildings 9 & 10 layout plan
Building 13 layout plan
Phase 3 key features
1. Grade A open plan offices at first floor (approximately 30% of GIA) with outstanding natural light and 2.8m ceiling heights
2. Dedicated service yards with loading doors to production areas
3. Building design to facilitate easy additional office, technical and lab area fit-out at ground floor – with 4m height from slab to underside of insulation just below the first floor
4. Photovoltaics to supplement energy use and air source heat pumps
5. EPC A
BREEAM Excellent
6. 8 metre minimum clear internal height to production areas
7. Full height glazing to office elevations and micro lined facade cladding
8. Maximised natural light to the production areas with 12% roof lights and translucent wall panels
9. FM2 floor tolerance in production area designed for uniform loads of 50 kn/m2
10. Large dedicated car parks with parking at a ratio of approximately 1:382 sq ft
11. 2.3 mVA power capacity equating to approximately 20 KVA per 1,000 sq ft
12. Approximately 25% of all car parking spaces served by an EV charging point
Detail by design
Buildings include full height glazing, providing maximum levels of natural daylight to the offices creating a stimulating working environment.
They have a strong identity, featuring a striking wrap-around projection detail and free-standing entrance canopies leading to an impressive double-height foyer with galleried stairs.
Images show completed Phase 2 units, Phase 3 to commence shortly.
Future occupancy
Phase 4
Phase 4 is to provide high profile technology buildings with A41 frontage. Catalyst’s design principles are to be enhanced with an additional office/technical accommodation storey.
Phase 4 key features:
- 3 HQ worthy buildings ranging from 33,630 – 49,235 sq ft
- 50% office/technical accommodation provided at first and second floors
- Clear height production areas with 11m min clear height to eaves
- 4m min clear height to underside of first floor
- 2.8m ceilings heights in offices with excellent natural light
- 2 MVA+ power connection
Phase 4 has potential for a single building of 128,500 sq ft.
